Outback 80A MPPT Charge Controller FLEXmax80
SKU:
CA$889.00
CA$729.00
CA$729.00
On Sale
per item
Outback 80A MPPT Charge Controller FLEXmax80
FLEXMAX 80 SPECIFICATIONS
Nominal Battery Voltages
12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
Maximum Output Current
80 amps @ 104° F (40°C) with adjustable current limit
Maximum Solar Array STC Nameplate
12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / 48 VDC systems 5000 Watts / 60 VDC Systems 6250 Watts
NEC Recommended Solar Array STC Nameplate
12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts / 48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts
PV Open Circuit Voltage (VOC)
150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum
Standby Power Consumption
Less than 1 Watt typical
Power Conversion Efficiency
98.1% @ 60 Amps in at 48 VDC System voltage - Typical
Charging Regulation
Five Stages: Bulk, Absorption, Float, Silent and Equalization
Voltage Regulation Set points
10 to 80 VDC user adjustable with password protection
Equalization Charging
Programmable Voltage Setpoint and Duration - Automatic Termination when completed
Battery Temperature Compensation
Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
Voltage Step-Down Capability
Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input
Programmable Auxilary Control Output
12 VDC output signal which can be programmed for different control applications
(Maximum of 0.2 amps DC)
Status Display
3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
Remote Display and Controller
Optional Mate or Mate2 with RS232 Serial Communications Port
Network Cabling
Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
Data Logging
Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production
Hydro Turbine Applications
Consult factory for approved Turbines
Positive Ground Applications
Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 cannot be used for use in positive ground applications)
Operating Temperature Range
Minimum -40° to maximum 60° C
(Power capacity of the controller is automatically derated when operated above 40° C)
Conduit Knockouts
One 1" (35mm)on the back; One 1" (35mm) on the left side; Two 1" (35mm) on the bottom
Warranty
Standard 5 year / Available 10 Year
Weight - Unit
12.2 lbs (5.56 kg)
Shipping
15.75 lbs (7.1 kg)
Dimensions - Unit
16.25 x 5.75 x 4" (41.3 x 14 x 10 cm)
- Shipping
22 x 10.5 x 9.75" (53 x 27 x 25 cm)
Options
Remote Temperature Sensor (RTS), HUB 4,
HUB 10, MATE, MATE 2
- Increases PV Array Output by up to 30%
- Advanced Continuous Maximum Power Point Tracking
- Full Power Output in Ambient Temperature up to (40°C)
- Battery Voltages from 12 to 60 VDC
- Fully OutBack Network Integrated and Programmable
- Programmable Auxiliary Control Output
- Built-in 128 Days of Data Logging
- Standard 5-Year Warranty
FLEXMAX 80 SPECIFICATIONS
Nominal Battery Voltages
12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
Maximum Output Current
80 amps @ 104° F (40°C) with adjustable current limit
Maximum Solar Array STC Nameplate
12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / 48 VDC systems 5000 Watts / 60 VDC Systems 6250 Watts
NEC Recommended Solar Array STC Nameplate
12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts / 48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts
PV Open Circuit Voltage (VOC)
150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum
Standby Power Consumption
Less than 1 Watt typical
Power Conversion Efficiency
98.1% @ 60 Amps in at 48 VDC System voltage - Typical
Charging Regulation
Five Stages: Bulk, Absorption, Float, Silent and Equalization
Voltage Regulation Set points
10 to 80 VDC user adjustable with password protection
Equalization Charging
Programmable Voltage Setpoint and Duration - Automatic Termination when completed
Battery Temperature Compensation
Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
Voltage Step-Down Capability
Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input
Programmable Auxilary Control Output
12 VDC output signal which can be programmed for different control applications
(Maximum of 0.2 amps DC)
Status Display
3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
Remote Display and Controller
Optional Mate or Mate2 with RS232 Serial Communications Port
Network Cabling
Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
Data Logging
Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production
Hydro Turbine Applications
Consult factory for approved Turbines
Positive Ground Applications
Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 cannot be used for use in positive ground applications)
Operating Temperature Range
Minimum -40° to maximum 60° C
(Power capacity of the controller is automatically derated when operated above 40° C)
Conduit Knockouts
One 1" (35mm)on the back; One 1" (35mm) on the left side; Two 1" (35mm) on the bottom
Warranty
Standard 5 year / Available 10 Year
Weight - Unit
12.2 lbs (5.56 kg)
Shipping
15.75 lbs (7.1 kg)
Dimensions - Unit
16.25 x 5.75 x 4" (41.3 x 14 x 10 cm)
- Shipping
22 x 10.5 x 9.75" (53 x 27 x 25 cm)
Options
Remote Temperature Sensor (RTS), HUB 4,
HUB 10, MATE, MATE 2
5 available
