TS-MPPT-60-600V-48-DB MORNINGSTAR TRISTAR CONTROLLER WITH DISCONNECT BOX
SKU:
CA$1,972.31
CA$1,972.31
TS-MMPT-60-600V-48-DB
MORNINGSTAR TRISTAR CONTROLLER WITH DISCONNECT BOX
MorningStar is pleased to announce the introduction of the TriStar TS-MPPT-600V -48-DB solar charge controller. The TriStar MPPT controller has become the world’s leading photovoltaic (PV) MPPT controller, operating in a myriad of off-grid industrial and residential installations around the globe. The TS-MPPT-600V-48-DB leverages the TrakStar MPPT technology and MorningStar’s 20 years of power electronics engineering excellence to deliver a PV controller with the widest PV input operating voltage range in the solar industry. The TS-MPPT-600V-48-DB differentiates itself from the TS-MPPT-600V-48 by having a DC disconnect box.
MorningStar’s products are built from the inside out to deliver more than twice the industry average operating life. The TS-MPPT-600V-48-DB delivers high reliability and excellent performance and features such as:
Technical Specifications:
Mechanical:
MORNINGSTAR TRISTAR CONTROLLER WITH DISCONNECT BOX
MorningStar is pleased to announce the introduction of the TriStar TS-MPPT-600V -48-DB solar charge controller. The TriStar MPPT controller has become the world’s leading photovoltaic (PV) MPPT controller, operating in a myriad of off-grid industrial and residential installations around the globe. The TS-MPPT-600V-48-DB leverages the TrakStar MPPT technology and MorningStar’s 20 years of power electronics engineering excellence to deliver a PV controller with the widest PV input operating voltage range in the solar industry. The TS-MPPT-600V-48-DB differentiates itself from the TS-MPPT-600V-48 by having a DC disconnect box.
MorningStar’s products are built from the inside out to deliver more than twice the industry average operating life. The TS-MPPT-600V-48-DB delivers high reliability and excellent performance and features such as:
- The industry’s best-in-class power efficiency
- Morningstar’s advanced 4-stage charging algorithm to optimize battery health
- Robust thermal, mechanical and electrical design
- Industry standard open communication protocols and interfaces for system networking, monitoring and communications
- Superior lightning protection from nearby lightning-induced voltage/current spikes
- Wide array input operating voltage range (5-525 V)
- Maximum 60A continuous battery current
- Supports nominal 48 volt DC batteries
- Facilitates simple and cost-effective design (including savings on wiring and labor costs)
- Enables use of existing high voltage PV or small wind turbines for battery charging
- Passively cooled for high reliability
- Compact form factor
- Ethernet standard
- Off-grid PV systems greater than 150 Voc with long wire runs from the array to the controller
- New installation grid-tie PV systems with battery back-up
- Retrofitting string PV inverter systems to later add battery back-up without changing the PV array configuration
Technical Specifications:
- Maximum Battery Current: 60 amps
- Maximum Input Current: 15 amps
- Maximum Open Circuit Voltage: 600 volts AC
- Peak Efficiency: 97.5%
- Nominal Solar Input: 3200Wp
- Nominal System Voltage:48 volts DC
- Battery Operating Voltage Range: 16-72 volts DC
- Input Operating Voltage Range: 5-525
- Voltage Accuracy: <= 0.1% +/- 100 mV
- Maximum Self-consumption: 1.75 - 2.5 Watts
- Transient Surge Protection: 4500 Watts/port
Mechanical:
- Maximum Power Terminals Wire Size: 2.5 mm^2 - 35 mm^2 / 14 AWG - 2 AWG
- Maximum RTS/Sense Terminals Wire Size: 0.25 mm^2 - 1.0 mm^2 / 24 AWG - 16 AWG
- Conduit knockouts: M20; 1/2, 1, 1-1/4 inch (trade size)
- Mounting: Vertical Surface
- Enclosure: Type 1 (indoor and vented) IP20
- Ingress Protection: IP20
- Dimensions: 21.4” x 8.7” x 5.9” (54.2 x 22.1 x 14.9 cm)
- Weight: 28.1 lbs (12.8 kg)
