SRNE Solar Charge Controller 60AMP - MPPT 12/24/36/48 Volt Full Auto NEW ML-4860N15
SRNE series MPPT charge controllers are the new standard in advanced maximum power point tracking. Four stage charging mode with various auto temperature and auto load control functions, for fast and effective charge control. Auto voltage range of 12V / 24V / 36V and 48V.
Features ETL certification same as CSA.
Available after June 7th 2020
- Current Limiting charge mode, when the PV panel is oversized and charge current exceeds the rated current, the controller will lower the charging power which enables the system to work under the rated current.
- 12V/24V/36V/48V auto detect
- Data Storage span can reach 5 Years
- Read or set controllers parameters with software interface cable and monitor the system status
- Built-in temperature sensor with temperature compensation mode.
- TVS Lighting protection
- Over-charge, over-discharge, over-load, over-heat, the battery reverses connection protection.
Operating Voltage: 12V/24V/36V/48V (Automatic Detection)
Max Input Voltage of PV Panel: < 150V
No-load loss: 0.7W~1.5W
Max Solar Power Input: 800W (12V) / 1600W (24V) / 2400W (36V) / 3200W (48V)
Stand by self consumption: <20mA
Charge current: 60A
Transfer efficiency: > 98%
MPPT tracing efficiency: > 99%
Over voltage protection: 16V~17V ; * nV
Limit charge voltage: 15.5V~16V ; * nV
Equalizing charge voltage: 15.0~15.5V ; * nV (25°C)
Equalizing charge interval: 3 ~ 30 days
Bulk charge voltage: 14.0V ~ 15.0V; * nV (25°C)
Bulk charge return voltage: 12.3V ~ 14.0V : * nV (25°C)
Float charge voltage: 13.2V ~ 14.0V ; * nV (25°C)
Over discharge voltage: 9.7V ~ 11.8V ; * nV
Temperature compensation: -4.0mV / °C / 2V
Over temperature protection: Yes
Light-operated open voltage: 5V
Light-operated close voltage: 6V
Light operated delay time: 5min
Device address: 1 ~ 16
FITTING AND CONSTRUCTION
IP Rating: IP32
Max wiring dimension: 25mm2
Working temperature: -35°C ~ ?°C
Dimensions: 286.7 x 170 x 128mm