KISAE DMT-1230/DMT 12-50 DC to DC SMART BATTERY CHARGERS (Alternator Charging Fully Programmable) - copy
- DC to DC Battery Charger
- Microprocessor controlled multi-stage charging algorithms (bulk, absorption, float) for gel, flooded and AGM batteries and equalization for flooded batteries
- Silent mode for quiet operation
- MPPT solar regulator allows you to provide maximum power from solar panels to battery
ABSO DC – DC BATTERY CHARGERSDMT 1250
OUTPUT VOLTAGE RANGE:CHARGE13.5 – 15.5 V
FLOAT 13.0 – 13.8 V for 12V Battery
EQUALIZE 15.5 V
CHARGING CONTROL
Five Stages (Test/Bulk/Absorption/Float/Recharge)
Four Stages (Test/Bulk/Absorption/Recharge)
Constant Power Supply (Program Setting)
DC OUTPUT BANK One
SELECTABLE BATTERY TYPE Gel, AGM, Flooded, Lithium, Program
PARASITIC CURRENT< 10 u
AEFFICIENCY> 90%
DC INPUT (BATTERY/ALTERNATOR):
DC INPUT RANGE 10.5 – 32 VdcDC
INPUT NOMINAL OPERATION 12.8 V charging system
ENGINE START CONTROL: ON DC Input from Battery/Alternator
ENGINE START CONTROL: OFF DC Input from PV Input (if available)
DC INPUT (PV INPUT):DC INPUT RANGE10.5 – 32 VdcDC
INPUT NOMINAL OPERATION 17.5Vdc for 12V PV panels connected in parallel
35.0Vdc for Dual 12V PV panel connected in series
MPPT TRACKING EFFICIENCY>98% (Target)
DC OUTPUT PROTECTION AND FEATURES: REVERSE BATTERYYes (shutdown)
Automatically reset
DC OUTPUT SHORT CIRCUIT Yes (shutdown)
Automatically reset
OVER CHARGE Yes (shutdown)
OVER TEMPERATURE Yes (de-rated and shutdown)
DC FUSE 2*30A, 32V
COOLING Force Air Ventilation
TEMPERATURE SETTING Hot, Nominal, Cold (no sensor connected)
BATTERY TEMPERATURE SENSOR PORTRJ12 (optional battery temperature sensor use)
DIGITAL DISPLAY PORTRJ12 (optional display panel use)
DISPLAY (CODES):INDICATOR ON
UNIT Flashing Green LED: Charging in process
Solid green LED: Fully Charged
BUILT-IN DISPLAY OR THROUGH RJ12 PORTLED Display with back lighting
Charging status, Battery Voltage
WARNING AND FAULT CODE On unit: Fault LED (red) Digital Display: A01,E0109
ENCLOSURE: DC INPUT
SIZE: DIMENSIONS9.5“ × 6.7” × 2.9” (243.2mm x 170mm x 72.5mm)
NET WEIGHT 4.1 lbs. / 1.85 Kg
DC OUTPUT CONNECTION: POWER CONNECTION Heavy Duty Connector
ACCESSORY (OPTIONAL):DC-DC REMOTE DISPLAYDMT RM01 (For viewing unit status, adjusting settings)
BATTERY TEMPERATURE SENSORBTS 10K (for battery charging voltage adjustment)
REGULATORY COMPLIANCE: MARKINGS cETLus
CONFORMANCE UL & CSA standards
EMI/EMCFCC Part 15 Class B
